K.
Opaljet 300 is a revolutionary media that allows one-pass finishing for Pop-Upª display
systems. K. Opaljet 300 offers a lighter, easier to print solution, compared
to alternative systems available on the market. It also offers a more
robust finished display, in comparison to traditional laminate/photobase
media/Stoplightª sandwiches,
which are prone to delamination if incorrectly handled.The media substrate is a custom extrusion of DuPont Teijin Melinex WLB¨ film. K. Opaljet 300 has a stop-light layer co-extruded within the film, ensuring bright saturated displays even in strong, mixed lighting. K. Opaljet 300 'P' uses the same base, coated with an ultra-fast drying, piezo/pigment compatible layer.
| K. Opaljet 300 | ||
| 914mm x 20m | £173.80 | |
| 914mm x 30m | £260.70 | |
1067mm
x 20m |
£202.90 | |
| 1270mm x 20m | £241.50 | |
| 1524mm x 20m | £289.80 | |
| untrimmed | 1560mm x 20m | £290.18 |
|
||
| K. Opaljet 300 'P' | ||
| 914mm x 20m | £195.71 | |
| 3" core | 914mm x 35m | £342.18 |
| 914mm x 30m | £293.56 | |
| 1067mm x 20m | £245.55 | |
| 1270mm x 20m | £292.28 | |
| 1524mm x 20m | £350.73 | |
| untrimmed | 1560mm x 20m | £350.89 |
